To use Force Field Fabric Protector on suede, first make sure your item is clean, dry, and brushed gently with a suede brush. Shake the can well, then spray from 6–8 inches away in light, even coats to avoid saturating the suede. Let it dry completely in a ventilated area away from sunlight for at least 24 hours. Regular maintenance will keep your suede looking great. Keep going to discover tips for long-lasting protection and troubleshooting.
Key Takeaways
- Clean and dry suede thoroughly, brushing with a soft suede brush before application.
- Shake the Force Field Fabric Protector can well and hold it 6-8 inches from the surface.
- Spray evenly using light, overlapping coats to avoid saturating the suede.
- Allow the suede to air dry in a well-ventilated area for at least 24 hours.
- Reapply protector every few months or after cleaning to maintain protection.
Preparing Your Suede Item for Protection
Before applying Force Field Fabric Protector, you’ll want to make sure your suede item is clean and dry. Start by gently brushing the suede with a soft-bristle suede brush to remove surface dirt and dust.
Avoid using water or liquid cleaners, as moisture can damage suede’s texture. If there are stains, try a suede eraser or a specialized suede cleaner designed for dry use.
Once clean, allow the suede to air out completely in a well-ventilated area, away from direct sunlight or heat sources that could cause fading or stiffness.
Let suede air dry fully in a shaded, ventilated spot to prevent fading and stiffness.
Ensuring your suede is free of dirt, oils, and moisture creates the perfect surface for the protector to adhere evenly and work effectively.
Taking these steps helps maintain your suede’s softness and appearance over time.
Applying Force Field Fabric Protector Evenly
When you’re ready to apply Force Field Fabric Protector, make certain to shake the can well to mix the formula thoroughly. Hold the can about 6-8 inches from the suede surface. Spray in a steady, sweeping motion, overlapping each pass slightly to guarantee even coverage. Avoid saturating any one area to prevent discoloration or stiffness.
Use light, consistent coats rather than one heavy layer. Visualize your application like this:
| Step | Action |
|---|---|
| 1 | Shake the can thoroughly |
| 2 | Hold can 6-8 inches away |
| 3 | Spray in smooth, sweeping strokes |
| 4 | Overlap passes slightly |
Following this method helps you protect your suede evenly without compromising its texture or appearance.
Allowing Proper Drying Time
Although it may be tempting to rush, you need to let the Force Field Fabric Protector dry completely to secure maximum effectiveness. Rushing the drying process can leave your suede vulnerable to stains and damage.
To guarantee proper drying:
- Find a well-ventilated area, avoiding direct sunlight or heat sources
- Let the suede sit undisturbed for at least 24 hours
- Avoid touching or using the item until it feels dry to the touch
- Check for any damp spots before storing or wearing
Tips for Maintaining Suede After Application
Since applying Force Field Fabric Protector creates a strong barrier, you’ll want to maintain your suede carefully to keep it looking its best.
Regularly brush your suede with a soft-bristle brush to remove dirt and keep the nap raised. Avoid exposing your suede to excessive moisture or direct sunlight, as these can cause fading or damage despite the protector.
Keep suede fresh by brushing gently and avoiding moisture or direct sunlight to prevent fading and damage.
When cleaning, use a suede eraser or a damp cloth for small spots, but don’t saturate the material. Store suede items in a cool, dry place away from heat sources to prevent drying out.
Reapply the protector every few months or after cleaning to maintain the barrier’s effectiveness. With these habits, your suede will stay protected and look fresh longer.
Troubleshooting Common Issues With Suede Protection
If you notice water spots or uneven protection on your suede after using Force Field Fabric Protector, don’t worry—you can usually fix these issues with a few simple steps.
First, gently brush the suede with a soft suede brush to lift the nap and even out the texture. Next, reapply the protector in a well-ventilated area, holding the can about 6-8 inches away to avoid over-saturation. Avoid applying too much at once, as this causes uneven coverage.
Finally, let the suede dry completely before use to guarantee full protection.
- Use a suede eraser to remove stubborn spots
- Avoid using water directly on suede
- Test the protector on a small area first
- Store suede items away from direct sunlight to prevent fading
Following these tips helps keep your suede looking great!
Frequently Asked Questions
Can Force Field Fabric Protector Be Used on Colored Suede?
You might wonder if Force Field Fabric Protector suits colored suede. It actually does, but you’ve got to test it first on a hidden spot. That way, you’ll avoid any surprises and keep your suede flawless.
Is the Protector Safe for Suede Shoes Worn in Rain?
Yes, the protector helps shield your suede shoes from rain, but it’s not fully waterproof. You should reapply regularly and avoid heavy soaking to keep your suede looking great and protected during wet conditions.
How Often Should I Reapply the Protector for Best Results?
You should reapply the protector every 3 to 6 months, or after cleaning your suede. If you wear your shoes often in wet or dirty conditions, consider reapplying more frequently to maintain ideal protection.
Can I Use the Protector on Suede Furniture or Just Clothing?
You probably thought suede furniture was off-limits, right? Nope, you can use the protector on both suede furniture and clothing. Just spray evenly, let it dry, and your suede stays safe from stains and spills!
Does the Protector Affect the Breathability of Suede Material?
You won’t notice much change in suede’s breathability when you apply the protector. It forms a thin barrier that repels stains without sealing the fabric completely, so your suede stays breathable and comfortable.