How to Put Velvet Fabric on Walls

Are you looking to add a touch of luxury to your walls? Learn how to put velvet fabric on walls and transform any room into a cozy and elegant space.

In this article, we’ll guide you through the process step by step. From choosing the perfect velvet fabric to applying it with ease, you’ll have your walls looking plush and inviting in no time.

So grab your materials and let’s get started!

Choosing the Right Velvet Fabric

When choosing the right velvet fabric for your walls, it’s important to consider the color and texture. Velvet fabric has become increasingly popular in interior design, adding a touch of luxury and elegance to any space. One of the current trends in interior design is using velvet fabric on walls to create a sophisticated and cozy atmosphere.

There are several pros to using velvet fabric on walls. Firstly, velvet has a soft and plush texture that adds depth and dimension to the room. It also has excellent light absorption properties, reducing glare and creating a warm and inviting ambiance. Additionally, velvet fabric is highly durable and long-lasting, making it a practical choice for high traffic areas.

However, there are a few cons to consider as well. Velvet fabric tends to attract and hold onto dust and pet hair, requiring regular cleaning and maintenance. It is also prone to fading in direct sunlight, so it’s important to choose a velvet fabric with good colorfastness. Lastly, velvet fabric can be quite expensive compared to other wall coverings, so it’s important to factor in the cost when making your decision.

Overall, choosing the right velvet fabric for your walls can enhance the aesthetics of your space, but it’s important to weigh the pros and cons before making your final decision.

Preparing the Wall Surface

Before you start, make sure you’ve properly cleaned and smoothed the surface. This is crucial for a successful application of velvet fabric on walls. Here’s what you need to do:

  1. Remove existing wallpaper: If there is any wallpaper on the wall, you’ll need to remove it before proceeding. Use a wallpaper scraper or steamer to gently peel off the old wallpaper. Make sure to remove any residue or adhesive left behind.

  2. Sanding: Once the wallpaper is removed, sand the wall surface to create a smooth and even base. Use a medium-grit sandpaper and sand in circular motions to eliminate any imperfections. Be thorough but gentle to avoid damaging the wall.

  3. Priming: After sanding, it’s essential to prime the wall to ensure proper adhesion of the velvet fabric. Apply a coat of primer using a paint roller or brush. Allow the primer to dry completely before moving on to the next step.

  4. Smooth the surface: Before applying the velvet fabric, run your hand over the primed wall to check for any remaining rough spots. Use fine-grit sandpaper to gently smooth out any imperfections. This step will ensure a flawless finish for your velvet fabric.

Applying the Adhesive

Once you’ve properly prepared the wall surface, it’s time to apply the adhesive for attaching the velvet fabric. This step is crucial to ensure a seamless and long-lasting application. Here are some tips to help you achieve the best results:

  1. Choose the right adhesive: Make sure to use an adhesive that is specifically designed for fabric and wall applications. Check the manufacturer’s instructions for the recommended adhesive type.

  2. Apply the adhesive evenly: Use a paint roller or brush to apply the adhesive in smooth and even strokes. Avoid applying too much adhesive, as it can cause the fabric to wrinkle or bubble.

  3. Troubleshooting common adhesive issues: If you encounter any issues during the application process, refer to the troubleshooting guide below:

Issue Solution
Wrinkles or bubbles in the fabric Smooth out the fabric with your hands or a wallpaper brush, starting from the center and working your way outwards.
Adhesive not sticking properly Ensure that the wall surface is clean and dry before applying the adhesive. If needed, sand the surface lightly to improve adhesion.
Excessive adhesive seeping through the fabric Wipe off any excess adhesive immediately with a damp cloth to prevent staining.

Attaching the Velvet Fabric

To attach the velvet fabric, make sure you have cleaned and prepared the wall surface properly. Here are four essential steps to follow for securing the velvet fabric securely and avoiding common mistakes with velvet wall installation:

  1. Apply the adhesive: Start by applying a thin layer of adhesive on the wall using a paint roller or a trowel. Make sure to cover the entire area where the fabric will be placed.

  2. Smooth out the fabric: Carefully unroll the velvet fabric onto the adhesive, starting from the top and working your way down. Use your hands or a clean cloth to smooth out any wrinkles or bubbles as you go along.

  3. Trim the excess fabric: Once the fabric is securely attached to the wall, use a sharp utility knife to trim off any excess material. Be cautious not to cut too close to the wall to avoid damaging the fabric or the wall surface.

  4. Allow it to dry: Give the adhesive enough time to dry completely before touching or moving the fabric. This will ensure that the velvet fabric stays securely in place and prevents any sagging or peeling.

Trimming and Finishing Touches

After securely attaching the velvet fabric to the wall, carefully trim any excess material using a sharp utility knife. Trimming is an essential step in achieving a professional and finished look for your velvet wall covering.

Start by inspecting the edges of the fabric to identify any uneven or jagged areas. Using the utility knife, gently guide the blade along the edge, applying light pressure to make clean and precise cuts. Take your time and work in small sections to ensure accuracy.

When trimming, be mindful of maintaining a consistent distance from the wall. This will help create a seamless appearance and prevent any gaps or overlaps. If you encounter any stubborn threads or frayed edges, simply trim them off to achieve a neat and polished result.

Remember to trim around any outlets, switches, or other obstacles on the wall. Measure and mark the fabric accordingly before making your cuts. Take care not to cut too close to the edges, as this can weaken the fabric or cause it to unravel.

Trimming techniques may vary depending on the type of velvet fabric you are using. Some may require a more delicate touch, while others may be more forgiving. Take the time to familiarize yourself with the specific instructions provided by the manufacturer.

Maintaining and Cleaning the Velvet Walls

Maintaining and cleaning the velvet walls is essential to preserve their beauty and prolong their lifespan. Here are four tips to help you keep your velvet wall decor looking its best:

  1. Regularly dust the velvet walls with a soft cloth or a gentle brush to remove any surface dirt or dust. Be sure to do this gently to avoid damaging the delicate fabric.

  2. In case of spills or stains, act quickly and blot the affected area with a clean cloth or paper towel. Avoid rubbing the stain, as this can push it deeper into the fabric. Instead, gently dab the stain until it lifts.

  3. Use a velvet-specific cleaner or upholstery shampoo for deeper cleaning. Follow the instructions on the product and test it on a small, inconspicuous area first to ensure it doesn’t cause any discoloration or damage.

  4. Avoid direct sunlight as it can fade the vibrant colors of the velvet fabric over time. Use curtains or blinds to protect your velvet wall art from prolonged exposure to sunlight.


In conclusion, putting velvet fabric on your walls can add a touch of luxury and elegance to any room. By choosing the right fabric, preparing the wall surface, applying the adhesive, and attaching the velvet fabric properly, you can achieve a stunning result.

Don’t forget to trim and finish the edges for a polished look. Lastly, regular maintenance and cleaning will ensure your velvet walls stay in pristine condition for years to come.

Enjoy the cozy and stylish atmosphere your velvet walls create!

Latest posts by Rohan (see all)